related articles

https://cometantenna.com/wp-content/uploads/2014/2189911554.html

Mounts/Brackets only

AVANTPF

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket fits between the hood and fender gap.
3/4″ hole accepts the standard NMO mount, or choose a Comet SO-239 type cable assembly which includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole.

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:

Chevrolet
Avalanche:  2004-2006
Silverado 1500, 2500, 3500:  2003-2006
Silverado Classic:  2007

CVANTPF

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt and fits between the hood and fender gap.
3/4″ hole accepts the standard NMO mount

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Chevrolet
Avalanche 2007-2013
Silverado 1500:  2007-2013
Silverado 2500, 3500:  2007-2014
Suburban   2007-2013
Tahoe  2007-2013

 

GMC
Sierra 1500:  2007-2013
Sierra 2500, 3500:  2007-2014
Yukon and Denali:  2007-2014

CV2ANTNCG

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.

Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector.  Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole in the bracket.

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Chevrolet
Silverado 1500:  2014 -2019
Silverado 2500, 3500:  2015 -2016 (You may need to trim a rubber weather strip for access to the fender bolt and proper fitting of the bracket.

GMC
Sierra 1500: 2014 -2019
Sierra 2500, 3500:  2015 -2019  (You may need to trim a rubber weather strip for access to the fender bolt and proper fitting of the bracket.

DGANTPF

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole in the bracket.

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Dodge
Ram 1500, 2500, 3500:  2002-2008

 

Ford
Explorer (Police Interceptor):  2011-2014

DG2ANTPF

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector.  Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole in the bracket.

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Dodge
Ram 1500:  2009-2018
Ram 2500, 3500:  2010-2018
Ram Chassis Cab:  4500, 5500:  2011-2018

EXANTNCG

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector.  Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole in the bracket.

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Ford Explorer (Police Interceptor)
2015-2019

FOANTPF

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole in the bracket.

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Ford
F-150:  2005-2008

FO2ANTPF

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole in the bracket.

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Ford
F-150:  2009-2014
Expedition:  2009-2014

FO3ANTNCG

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, bracket extends between the hood and fender gap.
3/4″ hole accepts a standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 type connector.  Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole in the bracket.

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

Fits these vehicles:
Ford
F-150:  2015-2019
Ford Super-Duty F-250, F-350 etc:   2017-2019
Expedition:  2018-2019

 

FO3ANTNCG-R

Vehicle specific fender bracket, no holes to drill
Passenger side installation only
Uses the existing fender bolt, bracket extends between the hood and fender gap
3/4″ hole accepts standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 type connector.  Choose a Comet SO-239 style cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 connector from falling through the 3/4″ hole.

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Ford
F-150:  2015-2019
Ford Super-Duty F-250, F-350 etc:   2017-2019
Expedition:  2018-2019

SDANTPF

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount
You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole in the bracket.

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Ford
F-250, F-350 SUPERDUTY:  2005-2010

SD2ANTNCG

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

 

Fits these vehicles:
Ford
F-250, F-350 SUPERDUTY:  2011-2016

SUANTPF

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

Fits these vehicles:
Chevrolet
Silverado 1500, 2500, 3500: 2000-2002
Suburban:  2000-2005

GMC
Sierra 1500,2500,3500:  2001-2006
Sierra Classic:  2007

SU2ANTNCG

Vehicle specific fender bracket, no holes to drill.
Drivers side installation only.
Uses the existing fender bolt, the bracket extends between the hood and fender gap.
3/4″ hole accepts the standard NMO mount

 

You can also use the bracket to attach an antenna that uses a PL-259 connector. Choose a Comet SO-239 type cable assembly, it includes a large washer and jam nuts to keep the 5/8″ SO-239 from falling through the 3/4″ hole in the bracket.

 

Note: For stability, our brackets are made of 14 gauge stainless steel.  Most NMO mounts are designed for installation through thin sheet metal, the thickness of our bracket makes it difficult for some NMO mounts to be cambered into place.  The Larsen NMOK mount does not have any problem.

Fits these vehicles:

Chevrolet
Tahoe:  2015-2019
GMC
Yukon:  2015-2019

RS-520

Light duty, 3 adjustment planes, up to 45″ antenna

Soft plastic gasket protects the vehicle paint

Fits over any edge 1/4″ thick or less, adjusts to vertical from virtually any angle.

RS-660U

Roof-Rack Mount

Adjustable roof rack mount, max width: 2.25 inches
Mount to either a horizontal or vertical brace on the roof rack and it will adjust to vertical.
Made for the newer wide roof racks.

Max recommended antenna height: 60 inches
5/8 inch hole accepts SO-239 connectors

RS-720/RS-720NMO

Medium duty lip mount, 3 adjustment planes.
Soft plastic gasket protects the vehicle paint
Attach to any lip on the vehicle, vertical or horizontal, as long as the lip is no more than 1/4″ thick.
The mount will adjust to vertical from almost any angle.

Recommended for antennas up to 60″ tall.

The RS-720NMO has a 3/4″ hole to accept an NMO mount.
The RS-720 has a 5/8″ hole to accept an SO-239 (PO) type connector like the standard mobile cable assemblies: 3D4M, 3D5M, CK-3M, CK-3M5

The RS-730 is a similar lip mount however the footprint is larger. If you have limited space along the lip edge, the RS-720 or RS-720NMO is a better option.

Footprint: 2.1″ x 1.15″

RS-730

Heavy-duty universal lip mount.
Soft plastic gasket protects the vehicle paint.
Four large set screws hold the mount in place, holding from the under-side.
Adjusts in three planes, attach to any lip on the vehicle and it will adjust to vertical.

Holds antennas up to 70″/1 lb.

Footprint: 3.4″ x 1.25″

RS-840

Heavy-duty lip mount, up to 80″ antenna
Soft plastic gasket protects the vehicle paint
Strongest of all Comet lip mounts, the RS-840 has a support tab that crosses over the gap between the trunk/door edge to give it additional strength. The surface across the gap should be flush with the mounting surface for this tab to rest upon.

 

Footprint: 3.75″ x 1.1″

 

After adjusting the mount so the antenna is vertical, a thru-bolt tightens and clamps the mount
in position preventing slippage or movement.

Four large set screws hold the mount on place.

Add any of our coax cable assemblies to complete the mount/coax combination.

 

The HD-5M model is the combination of the RS-840 bracket and CK-3M5 deluxe coax cable assembly.

This bracket has been used with large Comet antennas antennas and the YAESU ATAS-120 with great results.