lip mounts with coax mobile mounts
Standard 4.5 inch magnet mount
SO-239 connector on the magnet, coax terminates in a soldered on PL-259 connector.
5 meters (16′ 9″) of RG-58A/U coax
Plastic film covers the magnet to help prevent scratching
Weather cap provided to cover the SO-239 connector when the antenna is removed
Standard 4.5 inch magnet mount
NMO mount on the magnet, coax terminates in a soldered on PL-259 connector.
5 meters (16′ 9″) of RG-58A/U coax
Plastic film covers the magnet to help prevent scratching
Universal adjustable lip mount, 16 ft 6 inch deluxe cable assembly with SO-239/PL-259 connectors. Quality construction, low loss coax cable assembly.
Installs easily in only minutes to virtually any lip on a vehicle.
Trunk lid, truck rear doors, SUV and van rear doors, hood lip, etc…
Minimizes or avoids paint damage on expensive and/or leased vehicles.
Footprint: 3.4″ x 1.25″
Mount adjusts in 4 planes. The first 18 inches of coax is mini RG-174A/U type allowing easy entry through the weather seal into the vehicle without causing wind noise, water leaks or coax damage. The coax balance is low loss with 24k gold plated SO-239 & PL-259 connectors. The PL-259 disassembles for easier routing. Soft rubber pad protects the vehicle paint, 4 large set screws hold the mount firmly in place.
Max Power:
HF: 100W
VHF: 75W
UHF: 50W
Universal adjustable lip mount, 16′ deluxe cable assembly with NMO/PL-259 connectors. Quality appearance and low loss coax cable assembly.
Installs easily in only minutes to virtually any lip on a vehicle:
Trunk lids, truck rear doors, SUV and van rear doors, hood lip, etc…
Minimizes or avoids paint dameg on expensive and/or leased vehicles.
Footprint: 3.4″ x 1.25″
Mount adjusts in 4 planes. The first 18 inches of coax is mini RG-174A/U type allowing easy entry through the weather seal into the vehicle without causing wind noise, water leaks or coax damage. The coax balance is low loss with NMO & PL-259 connectors. The PL-259 connector disassembles for easier routing or to shorten the coax length. Soft rubber pad protects the vehicle paint, 4 large set screws hold the mount firmly in place.
Max Power:
HF: 100W
VHF: 75W
UHF: 50W
Heavy Duty lip mount with a 3/8-24 threaded socket to accept small screw-driver antennas, CB antennas, etc…
Universal adjustable lip mount, 16′ 6â€? deluxe cable assembly with 3/8-24/PL-259 connectors. Quality appearance and low loss coax cable assembly. Installs easily in only minutes to virtually any lip on a vehicle. Trunk lid, truck rear doors, SUV and van rear doors, hood lip, etc… Does not damage expensive and/or leased vehicles.
A lateral support tab is part of the lip mount. Be sure this support tab will not interfere with the opening/closing of the door, trunk, etc…
Footprint: 3.75″ x 1.1″
Max Power: HF: 200W SSB
VHF: 75W FM
UHF: 50W FM
Mount adjusts in 3 planes. The first 18 inches of coax is mini RG-188A/U type allowing easy entry through the weather seal into the vehicle without causing wind noise, water leaks or coax damage. The coax balance is low loss, 3/8-24 threaded socket to accept the antenna coax terminates in a PL-259 connector. The PL-259 disassembles for easier routing or to shorten the coax length. Soft rubber pad protects the vehicle paint, 4 large set screws hold the mount firmly in place
Universal adjustable lip mount, 16′ 6â€? deluxe cable assembly with SO-239/PL-259 connectors. Quality appearance and low loss coax cable assembly. Installs easily in only minutes to virtually any lip on a vehicle. Trunk lid, truck rear doors, SUV and van rear doors, hood lip, etc… Does not damage expensive and/or leased vehicles.
A lateral support tab is part of the lip mount. Be sure this support tab will not interfere with the opening/closing of the door, trunk, etc…
Footprint: 3.75″ x 1.1″
Max Power: HF: 200W SSB
VHF: 75W FM
UHF: 50W FM
Mount adjusts in 3 planes. The first 18 inches of coax is mini RG-174A/U type allowing easy entry through the weather seal into the vehicle without causing wind noise, water leaks or coax damage. The coax balance is low loss with 24k gold plated SO-239 & PL-259 connectors. The PL-259 disassembles for easier routing or to shorten the coax length. Soft rubber pad protects the vehicle paint, 4 large set screws hold the mount firmly in place.
NEW!!
The LD-5M will fit in many locations where the larger lip mounts:
- Have limited space to attach a lip mount
- Have a curved/radius edge that will not accept a wide lip mount
Or, if you have the space but simply:
- Want to keep a minimum profile
- Are using a small antenna
The LD-5M universal lip mount is the perfect answer!
It has a very small foot print (1.25″ x 1.00″) to fit in tight or limited space installations.
The mount is adjustable in 2-planes so it rotates to compensate for the trunk angle or to set the antenna vertical even on vertical doors like rear truck doors, van, SUV doors, etc…
Quality appearance and quality materials: 16’9″ low loss deluxe coax cable assembly, the first 18″ being mini RG-188 type coax (1/8″ diameter) to get through the weather seal without damaging the coax, causing wind noise or creating water leaks. The balance of the coax is low loss, 24k gold plated SO-239 and PL-259 connectors. The PL-259 connector disassembles for easier routing through small holes, under the carpet, etc…or to shorten the coax length.
Rain cap included. Soft rubber pad protects the vehicle paint, two large set screws hold the mount securely to the trunk, hood or hatch door.